SRAM? AXS? Shifter Pairing

This article reviews how to connect or "pair" SRAM? AXS? wireless shifters.

1

Preliminary Information

This article will review SRAM? AXS? component groups installed on a bike being paired or connected wirelessly from the shifter to the derailleur. This is only necessary for out-of-the box components, or for shifters that were replace, for example from crash damage.

2

Pairing Procedure

Locate the AXS? button on rear derailleur. Press and hold the until the green LED blinks. Release button.

AXS pairing 001

Press AXS? button at rear derailleur

Locate the AXS? button on front derailleur. Press and hold the until the green LED blinks. Release button.

AXS pairing 002

Press AXS? button on front derailleur

Press and hold the AXS? button on one shifter until the green LED blinks quickly, then release. Repeat on the other shifter.

AXS pairing 003

Press AXS? button on shift levers

Again locate AXS? button at rear derailleur. Press and release to end pairing session. Green LED lights should stop blinking. Bike is ready for gear adjustment.

AXS pairing 004

Press and release AXS? button