Find Repair Help by searching, selecting categories, or clicking on the "View Bike Diagram" button (Tablet or Desktop).
1-10 of 13 Articles Found
This article contains an array of tables to assist in choosing the correct tools, cutters and spacers when reaming, tapping, or facing bicycle frames. The products referenced in this article can be found under the Frame & Fork Tools category.
This article will discuss derailleur hanger alignment and use of the DAG-2.2 and DAG-2 Derailleur Alignment Gauge.
This article will discuss cutting and sizing of bicycle forks.
This article will discuss the service of built-in water bottle fittings.
This article will review the service of the RockShox? Pike? suspension fork.
This article will review the service of the RockShox? Monarch rear shock.
This article will discuss alignment of rear wheel dropouts and fork dropouts.
This article will discuss frame alignment and the use of the FAG-2 Frame Alignment Gauge. Frame alignment issues and repairs are best addressed by professional mechanics and frame builders. If your frame does not ride quite "right," it is worth having the alignment checked by these professionals.
This article will discuss the FTS-1 Fork Threader and how to properly use it to thread forks.
This article will review the use of the DT-4 Disc Mount Post Facing Tool (discontinued).